Cornice for Roman curtains and its osebennosti
Nowadays this kind of curtains has become quite popular among many consumers due to many advantages, including excellent protection against ultraviolet radiation, practicality, democratic prices, and most importantly, ease of care. Speaking of how to install a curtain rod for a Roman curtain, it is worth emphasizing that if you have at least a little experience in fixing the crossbeams, you will cope with this task without special difficulties. Due to the fact that this product in its design has some difference with the classical curtains, its fastening is done in a slightly different order.
Cornice for Roman curtains: instruction in detail
All that is required for fastening (bracket, rope locks, ring, bottom bar and cornice, eyelet, control mechanism) comes complete with the purchase, well, as for the tools, then for each master they should be in stock. So, you can start fixing.
This type of curtain is the best option for creating both modern and classic interior design of a certain room. Fabrics for the manufacture of Roman curtains can pick up any kinds and colors. First, you need to collect the material in horizontal folds. To do this, from the wrong side, the curtain or tulle is fastened to the hard type rails. Thus, the cornice for the Roman curtain is installed.
How will everything work?
In advance it is necessary to think over the control mechanism, which is extremely accurate for your interior. The control can be either mechanical or automatic, and the fastening design is fully dependent on it. In the case of curtains of this type, the lifting and lowering mechanism does not differ in great complexity, and control is performed with a special rope and cornice. Lifting or lowering the curtains, you just need to pull or release the cord. Moving is carried out due to the blocks that are located in the cornice.
Before fixing the curtain rod for the Roman curtain, make sure that all components and components are complete.
If the check has given a positive result, then after unpacking the product, find the lift and lowering cord and straighten it. To do this, lower the curtain down. Unscrewing the nut from the fastening bolt, it is necessary to detach the bracket, reminiscent of the letter G.
Applying the cornice to the surface of the wall or ceiling, make marks on it according to the holes that are in the crossbar. Using a perforator or a drill (depending on the construction of the wall), it is necessary to prepare holes.
Cornice for Roman curtains: the actual installation
Taking a L-shaped fastener, you need to use a self-tapping screws or dowels to make the installation, while observing that the mounting bolt "looked down".
Further, it is necessary to pass the bolt through the hole in the cornice, with great care to connect the cornice with the cloth and fasten it all previously unscrewed from the bolt nut.
It is necessary to pay attention to the fact that this type of fastening can be made inside the window opening, but with some conditions. First, the ideal verticality of the slopes should be observed; secondly, the upper transom, and not the window sashes, should be opened for ventilation. Now you know what a cornice is for a Roman curtain. The price of this product is very affordable, which means that anyone willing can afford such a novelty.