How to choose a tubing? Reviews, recommendations
When the time of winter cold comes, most of us settle in their homes in front of the blue screens with a hot cup of tea and lose all interest in games and outdoor walks. But it's so boring. It's clear, not everyone can master skating or skiing, but do not write off the scoop from the hill. This winter fun brings only positive emotions! True, this is only when the sled is comfortable and safe. Fortunately, today you can buy a fairly comfortable inflatable sled. Perhaps you already have a fair question: "How to choose a tubing for skiing?" Then do not delay with its purchase! In addition, many have already admitted that this is the most acceptable option, because it is considered safer in comparison with traditional sleds.
Its name was obtained from its English analogue tube, which means "pipe". This device has a lot of undeniable advantages. Therefore, when you become acquainted with even some of them, you will even more want to learn about how to choose a tubing. Reviews of all who were fortunate enough to purchase this invention are the best.
Firstly, it skates not only on snow, but also on water, which can significantly diversify summer vacation for any person. Secondly, tubing is suitable for both adults and children. Thirdly, the product itself is much easier than conventional sledges, it has comfortable handles and protective fasteners. In addition, there are such varieties that can stand several people at a time. Believe me, such skating will bring you wonderful impressions from extreme descents and trips, even in spite of the frosty air or cool moisture.
Outfit for inflatable sledges
However, in order not to spoil your most positive impressions, it is necessary to find out which tubing to choose. After that, it will be easier for you to make a successful acquisition. First of all, what you should pay attention to is the material from which it is made. This criterion affects the durability and speed during skiing. The tube must be made of reinforced PVC fabric. Products made of polyvinyl chloride are better slip, more wear-resistant and reliable. Also, inflatable sleds can be created with the use of additional less strong and not protected from hooks of synthetic materials: nylon, cordura, polyoxford. These fabrics have very fancy colors, which will only add a distinctive personality to your tubing.
The sledge bottom must necessarily be made of PVC with the greatest possible density. How to choose the right tubing? The higher the indices of the product, the greater the weight it will withstand. However, the mass also increases, so the base should be more durable (900 g / m 2), and 650 g / m 2 is enough for the top. If you are not going to ride often, it is better to purchase a tubing easier. In the event that it will be used almost every day, choose a product from a more durable material.
Also it is necessary to make sure that the structure has no defects, and the air in it is placed evenly. And in addition to all the tubing sheath must have a dual firmware, and the seams should additionally be protected by a slingshaft. As a result, inflatable sleds, consisting entirely of PVC, are more robust, and the synthetic surface protects against injuries and damages. For ice slides, sleds with a plastic bottom are most suitable.
How to choose the right diameter?
Have you already chosen inflatable sleds for their appearance, and do you like them? Do not rush to buy the product right away, until you decide on the dimensions. First of all, special attention should be paid to the seat. It should be comfortable and deep enough.
In addition, you need to know the exact ratio of your height to the diameter of the product itself, and based on these parameters, choose tubing. How to choose the size? There are a variety of circles, the size of which varies between 60-150 cm. However, there are both large and small volumes. It is important to know that manufacturers often indicate the diameters of products in a blown condition. When inflated, all dimensions become slightly smaller.
Now let's talk about how to choose a tubing. If the height of a person is within 2 m, or you expect to ride alone, choose a diameter of 120-125 cm. When the growth is less than or exactly 1.75 m, the outer diameter should be 110-115 cm. However, these criteria are relative. Everyone must select the inventory in accordance with their personal parameters. But do not forget, the larger the dimensions of the inflatable sled, the less acceleration, and the friction from this only increases.
Take care of your baby
The basic selection criteria for children are practically the same, but there are some nuances. If the child is very small, care should be taken so that he can reach the handles freely. The feet should touch the ground a little, but the distance should not exceed the prescribed norm up to 10 cm. If suddenly you have purchased a tube with a larger diameter than necessary, it is better to ride together.
However, when the baby for the first time in his life moves down from the hill, it is desirable to ride several times with him. This is necessary in order to make it easier for him to manage the device in the future. It is important to pay special attention to the slides from which your child is going to go down. When the child leaves the hill, it will be necessary to climb it afterwards.
How to choose a tubing if the snow track is not equipped with the necessary lifts? The weight of the inflatable sled should be suitable to rise independently with them. However, do not forget: the higher the hill, the more the product should be. If it is small or too large, skating will not bring any of you the expected pleasure!
Dimensions inflatable sled for children
Now consider how to choose a tubing for a child. For a teenager of 14 years, whose growth does not exceed 1.4 m, an external tubing size corresponding to 95-110 cm is suitable. If the growth of a child aged 5-14 years is not more than 1 m, a product with a diameter of 80-90 cm should be chosen. For carapaces 2-6 years it is necessary to purchase an inflatable sled with the parameters 65-85 cm.
What's inside the tube?
In quality tubing as a basis, car cameras are used. Filling in the form of an inflatable circle of various configurations is unacceptable! If you want to buy a camera separately, you should pay very careful attention to such an acquisition. First, higher-quality cameras from the domestic manufacturer, since they are more durable. Secondly, if you opted for a less expensive option, then do not be discouraged when on one "beautiful day" it bursts. Always ask the seller about the manufacturer, and try not to save in this case.
Basically, the camera corresponds to the diameter of the inflatable sled. However, sometimes set and other diameters. Everything depends on the desired result. If the camera is smaller, it needs to be pumped up more, this will give stiffness, and the device will begin to slide better. Consequently, when a large-sized camera is used, the product becomes softer for descent over a more embossed terrain, but the sliding force will suffer significantly.
Check all fastenings
In the configuration of any inflatable sled should include a loop for transportation. In addition, with special thoroughness it is necessary to check the reliability of its attachment to the tubing. One situation when you are going to use a leash solely for raising a toboggan on a hill or to roll a child on them. In this case, it will be sufficient to have a rope tied to a loop with a length of 1.5 m.
Another situation, if you decide to go for a snowmobile or in the summer time for a jet ski or a boat. Then you need to purchase a product with more reliable attachments. In this case, a tow rope is used, the length of which is up to 4 m. It is fixed throughout the diameter of the circle, which does not allow the tubing to spin during the ride.
And the last thing on which I would like to stop your attention when thinking about how to choose a tubing is the handles! Basically they are made of the same material as the cable. Sometimes, for more convenient use, they can be trimmed with a cloth, and inside they are filled with, for example, foam rubber. There are plastic or rubber inserts. However, the most reliable and practical handles are made of PVC. After that they glue a certain glue, and for greater reliability also roll a roller of steel.
In any case, carefully examine all the fasteners. Remember, the most unreliable version of the pens - when they are sewn simply to the material of the shell. This can lead to serious damage and injury. The safest fastening when they are firmly sewn to the wire-reinforced cable. As a consequence, the load is distributed correctly, and the fabric is securely protected.
Proper use and storage
Now you already know almost everything about how to choose a tubing. However, the use of the product itself also prescribes certain simple tips and recommendations. This will prolong the life of your product, and prevent possible injuries and damage. Since the model is not equipped with a brake, be careful! During the descent, focus your attention on other skaters. Do not jump on it, and do not run it standing up. Ride exclusively on the snow-covered terrain under a slope of no more than 25 degrees, away from trees and shrubs.
If it is a question of water tubing, then the main danger for him may be overflowing stones, fishing gear, reeds. Do not drag it to the pond on a pebble or sand, only move it in your hands. The product is recommended to be stored in inflated form for not more than 10 days. However, when it is blown off, do not forget to dry it beforehand.