How to clean the iron of burnt: tips and advice
Increasingly wide scale has become a problem with soot on the bottom of the iron. This is mainly due to the negligence of the owners: you chose the wrong mode for Ironing, mess something misused. And now the iron is dirty and needs cleaning. How to remove iron from the penetration? In this article we will consider this problem and ways of getting rid of it.
The easiest way to solve this problem is to buy a new one. However, for someone such option, on the contrary, the most difficult. Not every family has the ability to change irons every month if someone is with him inadvertently drawn. Cleaning the soleplate can be and not would be, if you follow the rules: manual temperature control, the use of soft water, etc. If you follow the rules that are recommended by the manufacturer of household appliances, you can avoid a lot of problems in the future. If you use hard water, then it is likely the formation of scale, and on the sole of the iron will have a plaque. This plaque will spoil you with the Ironing. Sometimes tissue can even burn. Therefore, in the future you should be careful once you manage to get rid of contamination.
How to remove iron from the penetration?
We live in the age of progressive technologies that are in place. So you can count on new inventions. In this case, will help universal tool for cleaning iron – a special pencil is designed with the most advanced technologies to remove carbon deposits. With the use of this tool is not difficult. You do not need to observe any special precautions and do not need qualified help for this procedure. It is only necessary to heat the iron and a pencil, and then RUB the bottom where the metal penetration. Begin to act, the chemical processes will exude unpleasant odors will begin to melt the scum, and so it is moving in the right direction. After this procedure the bottom of the iron should be wiped with a cloth, and hand wash well with soap and water.
How to remove iron from the penetration, if the pencil is no such and there is no possibility now to purchase it? Do not worry as there is another way. This tool was used by our ancestors. You will need newspaper and salt finely. It is necessary to pour a handful of salt on the newspaper, then heat up the iron and start smoothing salt on the newspaper as if you were stroking your stuff. If salt will be painted black – so the scale is steadily going. Upon such Ironing, wipe the bottom of the iron, first wet and then dry cloth. However, be careful, as during this procedure the bottom of the iron can get scratched.
Also, you can help a mixture of liquid detergent and baking soda. To obtain the necessary cleaning mixture, it is necessary to combine the indicated ingredients, then mix them until a homogeneous mass. The resulting slurry should be rubbed into the damaged surface of the iron. In 30 minutes you need to wash it with the mixture and wipe with a rag. With this method of cleaning heat iron is not necessary.
In principle, even vinegar can be useful for cleaning carbon deposits remedy. Clean the iron with vinegar as you wash the dishes with water. In this case, note that the vinegar fades quickly, requiring periodic impregnation. Now you have learned how to clean the iron from burning-in at home.