Warmer with cherry pits with own hands: manufacturing techniques and recommendations
Most parents know how the newborn baby is suffering when colic occurs in his stomach. What means are not used to save him from this pain. It helps to relieve the suffering of a child's warm diaper, which must put the baby on a sick stomach. The only negative - the fabric very quickly cools, and the diaper has to warm again and again. In this situation, just the thermo-heater with cherry pits as a filler is useful.
Let's see what the advantages of such a warmer for a baby and how to sew it yourself at home.
Warming pot with cherry pits: description
The product is an innovative product designed to retain heat and create comfort. Such products outwardly resemble soft toys familiar to all from childhood, but instead of the traditional filler cherry pits are used here. Unlike sintepon and holofayber, it is environmentally friendly, natural material. It is absolutely hypoallergenic and has a special energy.
To attract the attention of children, baby warmers with cherry bones are sewn in the form of animals or cartoon characters. The material of the top uses natural cotton and linen fabrics of bright colors. The natural filler has excellent healing qualities, which greatly expands the scope of application of the heating pad.
What is a hot-water toy for?
A hot-water toy with cherry bones first of all performs the function of a thermostat. The thing is that this natural material quickly heats up and slowly gives off heat. A hot-water bottle with cherry pits helps in the following cases:
- Promotes fast falling asleep of the child. To do this, it must be heated before going to bed and give the baby in the hands. The heat will help the child to relax and quickly fall asleep.
- This is an excellent alternative to traditional mustard plaits for coughing. To do this, the warmer should be placed on the chest and left in this position for ten minutes.
- A cooled toy will help with stretching, bruising and trauma.
- A hot-water bottle with cherry bones for a newborn helps to get rid of colic. To do this, it is heated and applied to the stomach. Spasm passes and the baby becomes lighter.
- The cold bottle will relieve the headache, lift the mood, restore strength, remove the swelling of the legs.
Thanks to an ecologically pure hypoallergenic filler, the toy heater can be used as a pillow.
Healing properties of cherry pits
Due to natural heat, the warmer relaxes well, relieves tension in muscles, relieves pain. This is not a new-fashioned panacea for all diseases, but a time-tested remedy. And the new-born baby's bottle is filled with cherry bones for a reason. Natural materials have, in addition to high thermal conductivity, special natural energy. It is enough to give a toy pleasant to the touch in the hands of a child, and he immediately calms down.
Warmer with cherry stones gives the desired warmth and coolness, while it does not contain harmful components and materials. This is a natural battery that keeps heat and cool for a long time, better than any ice-based compress.
How to prepare a heating pad for use
To use the hot-water bottle in hot mode, it must be preheated. To do this, the toy should be placed with a microwave oven for 2 minutes at a power of 500-600 watts. Also for heating, an ordinary oven is also suitable. It needs to be warmed up to 80 degrees and send the toy there for 15 minutes. It should be remembered that reheating of the product is possible only after it has completely cooled down.
To use the toy in the cold mode, it is wrapped in a plastic bag and sent to the freezer for at least an hour. In addition, the heating pad can also be used without preheating or cooling, at room temperature.
A hot-water bottle with cherry bones for a newborn requires special care of it. Some toys from this series can indeed be washed in a washing machine. But this is only on condition that the filler is in a separate pouch that can be pulled out. In this case, only the cover from the toy is erased, and the cherry bones remain dry.
Warmers, which are made at home, are sewn without additional cover. Therefore, you can not erase them, or if you want, you need to open the seam of the toy and pull out the filler. After that, the heating pad will need to be sewn again.
Games with a hot-water bottle
Most often a hot-water bottle with a natural filler is made in the shape of an animal, so picking up a favorite toy for your child (which will also bring the baby health benefits) will not be difficult. All products are sewn in such a way that it was convenient for them to play, hug.
A hot-water bottle with cherry bones can replace an expensive developing toy. This filler develops tactile sensations in the baby and fine motor skills.
Warmer with cherry stones
Heaters with natural dry fillers, including cherry pits, are offered today by domestic and foreign producers. This is due to the great demand for ecological toys for children. But those who know how to sew at least a little can make a heating pad with their own hands.
- a large cut of fabric of the same color for the basic details of the toy;
- a small patch of fabric of a different color for the back of the ears and tail;
- synthetic filler (packing) for the head, upper and lower extremities, tail and ears;
- properly prepared cherry pits.
Open the fabric and prepare the filler
Making a toy in the form of a bunny begins with the construction of a pattern and the preparation of materials for the top of the product and filling. First of all, this applies to cherry stones. Before packing in a toy, they must be thoroughly rinsed, boiled in water with a small amount of vinegar and thoroughly dried.
All the details of the toy must first be applied to the pattern, then cut and transferred to the fabric. Do not forget to add seam allowances when cutting. As a result, 4 pieces of fabric should be made for the lower and upper extremities, 2 or 4 for the body (depending on whether the seam is in the middle or only on two sides), 4 elements for the ears (2 of them the same color and 2 others) , 3 flaps for the formation of the head and a round tail.
Detailed instructions for sewing hot water bottles
After everyone did cut out of the fabric, you can proceed with their stitching. First, the elements of the upper and lower limbs, ears and head are connected together. They need to be sewn to the body of the bunny and filled with filler. Thanks to this, the cherry-seed warmer will look like a real soft toy. Joints of the tissue between the body and the limbs must be sewn (seized) from the inside. If this is not done, the sintepon with the bones will be mixed, and the toy will lose its presentable appearance.
Now you can sew the body of a hare. You need to do this from the wrong side with a suture seam. When there is already a small hole, the toy needs to be turned out. From the plastic bottle, make a funnel and pour the bones into the resulting cover through the hole. To sew a hare. On the reverse side, sew a tail, filled with sintepon and embroider eyes on the head.
As a result of simple actions, a real hot-water bottle with cherry bones turned out. The reviews of moms confirm that it is done very quickly, not more than two hours, and it costs several times cheaper than the purchased one. By the way, the price of a hot-water bottle in a store is about two thousand rubles, but it hardly exceeds the quality that is made by oneself.