How to connect the dishwasher correctly
This article will answer the question of how to connect the dishwasher. When it is built into the working kitchen area, drainage, power and water are directly connected to it. But if the technology was purchased separately, then how to connect the dishwasher, you will have to break your head.
The first thing for this element of home appliances is to find a suitable place. In order to avoid excessive load on the pump and do not extend the sewage hose, the machine is preferably located closer to the sewer. Extend water and electricity can be without any consequences.
How to connect the dishwasher to water
In most modern houses, the water pipe is made of metal plastic or simply plastic. It is not difficult to cut into it. The main thing is, before installing the dishwasher, shut off the main tap to the house of water. Choose a place closer to the device and install the tee, after which the tap will go. This will help quickly shut off the water in the event of a breakdown. In addition, the inlet valve located inside the dishwasher can break down, then a flood threatens the apartment. It is worth paying attention to the fact that modern representatives of such household appliances are equipped with protection against flooding, and it is called differently by each firm. This parameter should be considered when buying.
If you have an iron water pipe in your house, it is recommended to install a coarse water filter in front of the machine, because the mechanism of this technique can fail from rust. If there is not enough hose length to the tap, it must be replaced by a longer one. This option, although not very cheap, but reliable. A more economical way is to purchase extension cords.
How to connect the dishwasher to the sewer
Sewage is removed by a flexible hose, which can be increased if there is a shortage of its length. The main thing here is not to overdo it. Extend the hose no more than 2 times to avoid a heavy load on the pump. Another option may be to connect the pipe itself to the machine. In addition, you can connect the dishwasher drain to the sink of the kitchen sink, if there is a drain for this purpose. To prevent dirty water from flooding into the machine, it is necessary to lift the hose just above the siphon, making a bend in the horizontal direction.
To do this, it is recommended to make an individual outlet with an automatic device that will go directly from the meter. The socket must be grounded, and the cable must have a cross-section of at least 2.5 squares or with three cores. This is done taking into account the fact that the dishwasher has more power. It is necessary to open the counter and find the phase of the main cable to the flat and zero using the indicator screwdriver. After it is connected to the machine, it is displayed in the kitchen. After it already follows the socket itself. After washing the dishes, turn off the machine, and then remove it.
And the most important thing when installing a dishwasher - is to set it on a level. There are two main ways. If you plan to hide the technique under the desk or in the cabinet, then the level can be set by the method of tests, determining the degree of vibration during the operation of the machine. Another way involves screwing the legs up to the stop and creating a platform under the household appliance clearly in the level.
Before starting work, be sure to read the instructions to the device. Good luck!